Standard Track System
Track construction with system and planning reliability
Modern track construction projects demand reliable, economical and long-lasting rail support. The Standard Track System has been developed for gauge-retained tracks and has proven itself over decades in urban tramway construction. The continuous elastic rail support reduces vibrations, protects the track structure and ensures stable operating conditions.
Product Features
- Reduced vibrations and noise emissions
- Long-lasting and low-maintenance rail support
- High flexibility for different superstructure types
- Reliable stray current insulation
- Quick and safe installation
- Sustainable materials with a positive environmental balance
Continuous rail support for extended service life
Continuous support avoids load peaks and significantly reduces rail wear. The result is lower maintenance costs, smooth running and permanently stable track geometry. The system is suitable for Vignole and grooved rails as well as for street and green tracks in concrete or asphalt.
Elastic filler blocks with multiple functions
The filler blocks used perform central tasks in track construction. They enable elastic deflection of the track relative to the rigid road structure and reduce stray currents and corrosion. At the same time, they have a damping effect on structure-borne noise and vibrations and minimise airborne noise in open track sections. During installation, they serve as abutments for rolled asphalt, concrete or paving and as reliable supports for elastic or thermoplastic joint sealant. The material properties ensure resistance to water absorption, frost-thaw-salt exposure and ageing.
Flexibility for every project
Element lengths between approximately 50 and 150 centimetres allow flexible adaptation to different superstructure types. Self-clamping versions enable rapid installation without additional tools. Variants extending up to below the rail head level allow jointless solutions and reduce the effort required for grouting work.
Tested safety and standards compliance
The Standard Track System meets all relevant European standards and has been tested for electrical insulation capability in accordance with DIN EN 50122 2 and material properties in accordance with DIN 45673-8. Temperature resistance up to approximately 300 degrees Celsius during overlay welding makes the system ideal for demanding inner-city applications.
Sustainability that is measurable
Sustainability plays a central role in modern infrastructure construction. The system is based on high-quality elastomeric materials with a positive environmental footprint, is fully recyclable and designed for a long service life. This not only reduces the ecological footprint but also the life cycle costs over the entire operating period.
Standard Track System
- Bulk density: ~1.1 g/cm3 (DIN 52102-RE-VB)
- Material properties in accordance with DIN 45673-8
- Water and de-icing salt resistant in accordance with Section 6.4.3 and 6.4.4
- Ageing resistant in accordance with Section 6.4.5
- Electrically insulating in accordance with DIN EN 50122-2
- Heat resistance in the range of overlay welding temperature (+300°C)
Which solution fits your application?
Our experts will advise you on products, applications and find the optimal elastomer solution for your area of use.
Get advice now